Prismatic Tempered Glass 3.2mm Low Iron Solar Photovoltaic For Energy Panel Safety

A 3.2mm low iron prismatic tempered glass for solar photovoltaic panels. The textured surface traps more light and the low iron body keeps transmission high, so the module captures more energy.

• 3.2mm low iron tempered glass for PV modules

• Prismatic surface for higher light capture

• High transmission with a low iron body

• Tempered for hail and impact resistance

• Cut and drilled to module drawing

• Produced to GB15763.2-2005 and CE standards

A prismatic surface scatters light so that rays arriving at an angle still reach the cell inside the module. Combined with low iron glass, which lets through more light than ordinary clear, the panel gives the module a little more of the energy falling on it every day.

A solar panel sits outdoors for years. Hail, wind, temperature change and cleaning all bear on the front glass, so it is tempered to take the impact and keep its shape without cracking.

Junction holes and frame edges are cut and drilled before tempering so the glass drops into the module assembly as drawn. Send the module drawing and we match the glass to it.

When modules are built in runs, the front glass has to match from the first unit to the last. We hold the pattern and coating specification for a product so a repeat order lines up with the earlier build.

• Solar photovoltaic modules

• Building integrated photovoltaics

• Solar water heater panels

• Outdoor energy equipment

Send the module drawing and we cut and drill the glass to match the frame and junction points before tempering.

OEM and ODM are welcome. Send your brand, logo, dimensions, finish, packing and marking requirements and we produce to your specification under your own label.

Sheets are separated with cork or EPE pads and packed in fumigation free plywood cases suitable for long sea freight, so edges arrive clean and unmarked.

Mixed sizes and thicknesses can be loaded together in one 20ft container to reduce freight cost. Delivery is about 15 to 20 days after deposit is received, and we ship to your nominated port with packing lists and shipping documents for customs clearance.

• Minimum order: one 20ft container, mixed sizes accepted

• Sample piece USD 15, credited against your bulk order

• Layered and packed in fumigation free plywood cases

• Delivery 15 to 20 days after deposit is received

• Payment by T/T, 30% deposit with balance before shipment

• One year warranty covering manufacturing defects

Can you match a module frame drawing?
Yes. Send the drawing and we cut and drill to match the frame and junction points.

Is the glass suitable for outdoor use?
Yes. It is tempered for impact and weather and is made for PV module front cover use.

Do you supply coated variants?
Coated low iron variants are available. Tell us the module design and we will advise.

Send your module drawing and we will quote the front glass.

Tell us the thickness, size, quantity and destination port, and we will confirm price, packing and lead time. Samples are available for approval before you place a bulk order.