Architectural Tempered Glass Panel 6mm High Class Durable For Building Skyscraper Facade

A 6mm architectural tempered glass panel with the flatness and clarity that tower facades demand. It resists wind load, thermal stress and impact, and keeps a clean, undistorted reflection across large areas.

• 6mm flat tempered glass with high class flatness

• Low optical distortion for large reflective panels

• Impact and thermal shock resistant

• Edges and holes processed before toughening

• Suits frameless and structural facades

• Produced to GB15763.2-2005 and CE standards

On a tall elevation every wave in the glass is multiplied by the facade behind it. High class flatness keeps reflections straight and shadows even, which is what separates a sharp building from a wavy one. Roller wave and bow are controlled at the tempering stage rather than corrected later.

Upper floors see stronger wind, sharper temperature differences between sun and shade, and higher impact risk from debris. Tempered float glass absorbs these loads and, if it does break, releases blunt particles rather than hanging as knife edged shards. That is why it is the default choice above ground floor level.

• Skyscraper and high rise facades

• Commercial building curtain walls

• Entrance canopies and atriums

• Feature walls and cladding

Panels are cut to your elevation drawings. Provide grid dimensions, corner details and any ventilation or fixing holes and we build them into the sheet before toughening.

OEM and ODM are welcome. Send your brand, logo, dimensions, finish, packing and marking requirements and we produce to your specification under your own label.

Sheets are separated with cork or EPE pads and packed in fumigation free plywood cases suitable for long sea freight, so edges arrive clean and unmarked.

Mixed sizes and thicknesses can be loaded together in one 20ft container to reduce freight cost. Delivery is about 15 to 20 days after deposit is received, and we ship to your nominated port with packing lists and shipping documents for customs clearance.

• Minimum order: one 20ft container, mixed panel sizes accepted

• Sample piece USD 15, credited against your bulk order

• Corner protected, packed in fumigation free plywood cases

• Delivery 15 to 20 days after deposit is received

• Payment by T/T, 30% deposit with balance before shipment

• One year warranty covering manufacturing defects

How is flatness measured?
We check bow and roller wave against GB15763.2-2005 limits and can supply inspection records on request.

Can you match an existing facade?
Yes. Send the existing thickness, tint and edge detail and we will match the sheet so new panels sit alongside the old ones.

Do you supply structural fixing holes?
We can drill and countersink holes to your detail before toughening so fixings sit flush.

Send your facade grid and height and we will confirm thickness, flatness grade and lead time.

Tell us the thickness, size, quantity and destination port, and we will confirm price, packing and lead time. Samples are available for approval before you place a bulk order.